Sailton Brand Phase Control Thyristor Rectifier Kp2000A3000V

Product Description

Silicon chip disk type phase control thyristor kp2000A3000V





High Voltage Phase Control Thyristor SCR

 

Feature

Design for high power industrial and power transmission applications. 

Optimized for low on-state voltage and match Qrr and VT available for series or parallel connections.

We provide one of the most comprehensive ranges of standard phase control thyristor

 

Application

1,High-power inversion 2,AC and DC motor control 3,AC/DC switching

4,Phase-controlled rectification 5,Active and passive inverter 6,Soft starte
 

Introduction:

A thyristor/SCR is a solid-state semiconductor device with four layers of alternating P and N-type materials. Some sources define a silicon-controlled rectifier (SCR) and thyristor/SCR as synonymous.

It acts exclusively as a bistable switch, conducting when the gate receives a current trigger and continuing to conduct while the voltage across the device is not reversed (forward-biased). A three-lead thyristor/SCR is designed to control the larger current of its two leads by combining that current with the smaller current of its other lead, known as its control lead. In contrast, a two-lead thyristor/SCR is designed to switch on if the potential difference between its leads is sufficiently large (breakdown voltage).

The first thyristor/SCR devices were released commercially in 1956. Because thyristor/SCRs can control a relatively large amount of power and voltage with a small device, they find wide application in control of electric power, ranging from light dimmers and electric motor speed control to high-voltage direct-current power transmission. thyristor/SCRs may be used in power-switching circuits, relay-replacement circuits, inverter circuits, oscillator circuits, level-detector circuits, chopper circuits, light-dimming circuits, low-cost timer circuits, logic circuits, speed-control circuits, phase-control circuits, etc. Originally, thyristor/SCRs relied only on a current reversal to turn them off, making them difficult to apply for direct current; newer device types can be turned on and off through the control gate signal. The latter is known as a gate turn-off thyristor/SCR, or GTO thyristor/SCR. A thyristor/SCR is not a proportional device like a transistor. In other words, a thyristor/SCR can only be fully on or off, while a transistor can lie in between on and off states. This makes a thyristor/SCR unsuitable as an analog amplifier, but useful as a switch.

 

Classification:

thyristor/SCR according to the shutoff, conduction and control methods can be divided into ordinary thyristor/SCR (SCR), bidirectional thyristor/SCR (TRIAC), inverse thyristor/SCR (RCT), gate turn off thyristor/SCR (decision), BTG temperature control of thyristor/SCR, thyristor/SCR (TT abroad, TTS domestic) and optically controlled thyristor/SCR (LTT), etc.

The thyristor/SCR can be divided into two polar thyristor/SCR, triode thyristor/SCR, and quadrupole thyristor/SCR according to its pins and polarity.

The thyristor/SCR can be divided into three types: metal packaging thyristor/SCR, plastic sealing thyristor/SCR, and ceramic packaging thyristor/SCR.

Among them, metal packaging thyristor/SCR is divided into a bolt shape, plate shape, round shell, and so on. The laminated thyristor/SCR is divided into two kinds: strip fin and no heat sink.

The thyristor/SCR can be divided into three types: high-power thyristor/SCR, medium power thyristor/SCR, and small power thyristor/SCR according to the current capacity.

In general, the large-power thyristor/SCR adopts a ceramic package, while the medium and small power thyristor/SCR is mostly sealed or metal encapsulated.

thyristor/SCR speed according to the cut-off can be divided into ordinary thyristor/SCR and fast thyristor/SCR, fast thyristor/SCR include all specially designed for rapid application of thyristor/SCR, have regular fast thyristor/SCR and working in a higher frequency of high-frequency thyristor/SCR, respectively applied to 400 Hz and above 10 kHz chopping or inverter circuits.

(note: high frequency does not equal fast thyristor/SCR)

 

Application:

we are one professional manufacturer and trading company for phase control thyristor and SCR. We are specialized in producing power semiconductors devices. The main products are fast switch thyristor/SCR(KK series)for MF inductor furnace, high voltage phase control thyristor/SCR(KP series) for soft start. And high voltage soft-start components, which the main technical indicators of high-voltage thyristor/SCRs have reached or exceeded those of international famous brand products.  The phase control thyristor/SCR(KP series) are widely used in high-power inversion, AC and DC motor control, AC/DC switching,phase-controlled rectification, Active and passive inverter, soft starter

 The fast switch thyristor/SCR(KK series)are widely used in inverters, chopper, inductive heating, Various types of forced converters, electric welding

the company's products have been sold nationwide and exported to Europe, Middle East, Southeast Asia, South Africa, and other countries and regions.

Factory




 

Phase Control Thyristor

Introduction:

Phase control thyristor is a low loss switch semiconductor device.It has a wide voltage range,from 1000V-8000V,Current range 100A-5000A.As a high power electronic component, it plays a very important role in the industry.

We design and manufacture various shapes of phase control thyristor. Our phase-controlled thyristor include disc thyristor and stud thyristor. Disc phase control thyristor current range from 500A to 6000A, voltage range from 1000V to 7500V.Stud thyristor maximum current 500A, Maximum voltage 2500V.

Our phase control thyristor has a very good low switching loss characteristic, it is popular be used on turn on and off equipment. For example, our medium voltage phase control thyristor(6500V thyristor) is popularly used on medium voltage soft starter, AC motor drives, and high power converter, etc. The low voltage thyristor(1600V-2800V) are popularly used on low power soft starter, AC drives.

With stable performance, our phase control thyristor also hot used on induction heating furnace. It is always used on a rectifier circuit of the furnace. Besides, our high power thyristor also used on traction and transmission, excitation, static var compensator(SVC), high current rectifier, high power supply, etc.

Certificate:


 

Phase Control Thyristor Features:

Design for high power industrial and power transmission applications. 

Optimized for low on-state voltage and match Qrr and VT available for series or parallel connections.

6500V thyristor special used for MSS high voltage

We provide one of the most comprehensive ranges of standard phase control thyristor/SCR

Soft start module and static var compensator (SVC)

 

Phase Control Thyristor Applications:

1, Low voltage soft starter, medium voltage soft starter

2, Industrial drives, Inverter, Converters

3, Traction and transmission, High current power supply

4, Excitation

5, Static var compensator (SVC)

Packing:

 

Datasheet for Code Selection

Capsule
Part  No.	IT(AV)	VDRM	ITSM	I2 t	VTO	rT	RthJC	RthCH	F	Outline
	Tc=70ºC	VRRM	50HZ  TVJM	50HZ  TVJM	TVJM	TVJM
	A	V	A	A2S.103	V	mΩ	ºC/W	ºC/W	KN
Up to 1200V
KP400/06-12	400	600-1200	6300	198	0.90	0.650	0.085	0.020	6	T6
KP600/06-12	600	600-1200	9200	423	0.93	0.600	0.045	0.010	9	T7
KP800/06-12	800	600-1200	11000	605	0.85	0.500	0.040	0.010	12	T9
KP1000/06-12	1000	600-1200	12500	781	0.83	0.350	0.035	0.008	16	T9
KP1800/06-12	1800	600-1200	27000	3645	0.85	0.180	0.020	0.006	25	T11
KP2000/06-12	2000	600-1200	31000	4805	0.83	0.150	0.018	0.006	32	T12
KP2600/06-12	2600	600-1200	45000	10125	0.85	0.130	0.013	0.005	45	T13
KP3800/06-12	3800	600-1200	62000	19220	0.80	0.050	0.011	0.003	55	T15
Up to 2000V
KP300/12-20	300	1200-1800	5000	125	0.95	1.200	0.085	0.020	6	T6
KP600/12-20	600	1200-1800	8200	336	1.00	0.600	0.045	0.010	9	T7
KP800/12-20	800	1200-1800	14000	980	0.95	0.350	0.035	0.008	16	T9
KP1000/12-20	1000	1200-1800	17000	1445	0.93	0.300	0.030	0.008	20	T10
KP1500/12-20	1500	1200-1800	24600	3026	0.92	0.230	0.020	0.006	25	T11
KP1800/12-18	1800	1200-1800	27500	3781	0.90	0.200	0.018	0.006	32	T12
KP2500/12-18	2500	1200-1800	45000	10125	0.85	0.130	0.013	0.005	45	T13
Part  No.	IT(AV)	VDRM	ITSM	I2 t	VTO	rT	RthJC	RthCH	F	Outline
	Tc=70ºC	VRRM	50HZ  TVJM	50HZ  TVJM	TVJM	TVJM
	A	V	A	A2S.103	V	mΩ	ºC/W	ºC/W	KN
KP3000/12-18	3000	1200-1800	54000	14580	0.90	0.070	0.011	0.002	55	T15
KP4000/12-18	4000	1200-1800	60000	18000	0.88	0.070	0.009	0.002	70	T16
KP5000/12-18	5000	1200-1800	80000	32000	0.88	0.065	0.007	0.001	90	T17
Up to2500 V
KP500/20-25	500	2000-2500	7500	281	0.95	1.100	0.045	0.010	9	T7
KP700/20-25	700	2000-2500	10000	500	1.00	0.720	0.035	0.008	16	T9
KP900/20-25	900	2000-2500	12800	819	0.95	0.500	0.030	0.008	20	T10
KP1300/20-25	1300	2000-2500	21000	2205	0.90	0.300	0.020	0.006	25	T11
KP1600/20-25	1600	2000-2500	25000	3125	0.95	0.260	0.018	0.006	32	T12
KP2000/20-25	2000	2000-2500	33000	5445	0.97	0.200	0.013	0.005	45	T13
KP2500/20-25	2500	2000-2500	41600	8653	0.90	0.150	0.011	0.002	55	T15
KP3200/20-25	3200	2000-2500	48000	11520	0.87	0.130	0.009	0.002	70	T16
KP4000/20-25	4000	2000-2500	74500	27751	1.00	0.100	0.007	0.001	90	T17
Up to3500 V
KP400/25-35	400	2500-3500	6100	186	1.10	1.750	0.045	0.010	9	T7
KP600/30-35	600	3000-3500	8300	344	1.05	1.000	0.035	0.008	16	T9
KP700/25-30	700	2500-3000	10000	500	1.00	0.700	0.035	0.008	16	T9
KP800/25-35	800	2500-3500	11500	661	1.00	0.750	0.030	0.008	20	T10
KP1200/25-30	1200	2500-3000	22000	2420	0.95	0.400	0.020	0.006	25	T11
KP1000/30-35	1000	3000-3500	17000	1445	1.10	0.600	0.020	0.006	25	T11
KP1200/25-35	1200	3000-3500	19000	1805	1.10	0.500	0.018	0.006	32	T12
KP1800/25-30	1800	2500-3000	29000	4205	1.05	0.300	0.013	0.005	45	T13
KP1600/30-35	1600	3000-3500	28000	3920	1.05	0.400	0.013	0.005	45	T13
KP2200/25-35	2200	2500-3500	31000	4805	1.03	0.250	0.011	0.002	55	T15
KP3000/25-35	3000	2500-3500	40000	8000	0.85	0.180	0.009	0.002	70	T16
KP3500/25-35	3500	2500-3500	72000	25920	1.00	0.150	0.007	0.001	90	T17
Up to4500 V
KP500/35-45	500	3500-4500	7000	245	1.20	1.600	0.035	0.008	16	T9
KP900/35-45	900	3500-4500	14500	1051	1.20	0.900	0.020	0.006	25	T11
KP1000/35-45	1000	3500-4500	15000	1125	1.18	0.800	0.018	0.005	32	T12
KP1500/35-45	1500	3500-4500	25000	3125	1.15	0.500	0.013	0.005	45	T13
KP1800/35-45	1800	3500-4500	25000	3125	1.15	0.350	0.012	0.004	50	T14
KP2000/35-45	2000	3500-4500	27000	3645	1.05	0.330	0.011	0.002	55	T15
KP2500/35-45	2500	3500-4500	32500	5281	1.25	0.230	0.009	0.002	70	T16
KP3000/35-45	3000	3500-4500	45000	10125	1.10	0.200	0.007	0.002	90	T17

Part  No.	IT(AV)	VDSM	VDRM	ITSM	VTO	rT	RthJC	RthCH	F	Outline
	Tc=70ºC	VRSM	VRRM	50HZ  TVJM	TVJM	TVJM
	A	V	V	A	V	mΩ	ºC/W	ºC/W	KN
Up to5200 V
KP400/45-52	400	4500-5200	4200-4600	5400	1.30	1.900	0.045	0.008	16	T9
KP800/45-52	800	4500-5500	4200-4600	12000	1.15	1.000	0.022	0.006	25	T11
KP1200/45-52	1200	4500-5200	4200-4600	19000	1.15	0.600	0.015	0.005	32	T13
KP1500/45-52	1500	4500-5200	4200-4600	25000	1.20	0.550	0.011	0.002	55	T15
KP2200/45-52	2200	4500-5200	4200-4600	45000	1.10	0.350	0.009	0.002	70	T16
KP2800/45-52	2800	4500-5200	4200-4600	55000	1.05	0.250	0.007	0.002	90	T17
Up to6500 V
KP300/55-65	350	5500-6500	4500-5600	4500	1.20	2.600	0.045	0.008	16	T9
KP700/55-65	750	5500-6500	4500-5600	11000	1.20	1.100	0.022	0.005	25	T11
KP1000/55-65	1100	5500-6500	4500-5600	14300	1.18	0.800	0.015	0.004	32	T13
KP1200/55-65	1200	5500-6500	4500-5600	22000	1.15	0.700	0.011	0.002	55	T15
KP1800/55-65	1800	5500-6500	4500-5600	31000	1.25	0.500	0.009	0.002	70	T16
KP2500/55-65	2500	5500-6500	4500-5600	43000	1.20	0.330	0.007	0.002	90	T17
TVJM=125ºC         If need 35mm  please note outline H code        H:35mm

 

Outline size: